ez-build.com
ez-build.com

GLOBAL EAZI BUILD
HOME SYSTEMS
The trend setter in “systemizing” the building process.

Products & Services

Below is a list of the products and services that EZ-Build Systems, Inc. offers with each one of its wood & non-wood building envelopes. EZ-Build Systems, Inc. is not limited to one product or one manufacturer and this list may be modified from time to time as the market and consumer preferences change.

  • FREE Experienced Professional Material Estimates
  • Architectural Drawings
  • Engineer Stamped Structural Drawings (from foundation to roof; P.E. stamped for every state)
  • Guaranteed Permit (please note that time frame to obtain a permit is not guaranteed)
  • Shop Drawings (assembly drawings for each component)
  • Assembly Video
  • One-stop-building-solutions
  • Energy Star & LEED approved systems
  • Toll Free Phone # to call for technical and building support. Our experienced and knowledgeable staff will help walk the contractor or owner/builder through the building process from preparing the site for material delivery to reading the shop drawings to onsite construction of the building system’s shell.

WHAT DO EZ-BUILD SYSTEMS, INC. WOOD PACKAGES CONSIST OF?

EZ-Build Systems, Inc. wood packages consist of three complete components: a sub floor system, a roof system, and a Structural Insulated Panel wall system. The floor system consists of your choice of either pre-engineered wood I-beam floor joists or pre-engineered open web trusses. Also included are ¾” tongue and groove sub-floor sheeting (or AdvanTech), rim joists, and sub-floor adhesive and fasteners. The wall system is typically 6 ½” SIP panels that are pre-chased for electrical wiring, pre-cut for all windows and doors and they come with headers installed. Also included are all your corner screws, top and bottom plates, optional spacer plate and adhesives. Finally, for your roof system, you will be provided with pre-built trusses with energy heels, roof sheathing (OSB or AdvanTech), gable ends with over hangs (where applicable), and heavy duty 30lb roof felt and fasteners. Please note that we also supply entire SIP packages (SIPs can be used for floors, walls and roofs).

This entire system is manufactured and engineered to meet all local and national building codes. Over and above these materials, you will also receive assembly drawings, engineer stamped structurals, and a toll free number to call for any technical support that you may require.

WOOD PRODUCTS:

Sub Floor System:

Sub Floor System
  • Pre-engineered Floor Joists as per plan (BCI or equivalent)
  • ¾” T&G OSB floor decking or AdvanTech
  • rim board
  • sub floor adhesive and fasteners

Wall System:

Wall System
  • Structural Insulated Panels for Walls, Floors, and Roofs
  • Structural Insulated Panels (thicknesses from 4 ½” to 12 ¼” and dimensions from 4X8 to 8X24)); pre-cut for all windows and doors;
  • headers installed; pre-chased for electrical wiring
  • Corner screws
  • Foam friendly adhesive
  • Top, bottom, and corner connection plates
  • Spacer plate
  • Foam scoop

Roof System:

Roof System
  • Pre-engineered trusses as per plan, engineered and manufactured to local building code requirements (i.e. common, cathedral, attic, etc)
  • Sheathing (7/16” OSB or upgrade)
  • Hurricane Ties
  • Roof Clips
  • Fascia and purlin lumber
  • Heavy duty 30lb roof felt and fasteners

*Please note that if a SIP roof is being used, we also supply the ridge beam, if required, and all lumber & adhesive necessary to install the SIP roof panels.

Additional Options:

Outer Shell
  • Material for interior partitions (i.e. studs or 4 ½” SIPs)
  • Alternate exterior facing material for SIP panels (i.e. T1-11, Smart Panel)

Other than nails, EZ-Build Systems, Inc. provides everything else that is required to turnkey the outer shell of your project, whether it’s residential, commercial, industrial or institutional.

WHAT DO EZ-BUILD SYSTEMS, INC. NON-WOOD PACKAGES CONSIST OF?

EZ-Build Systems, Inc. building packages consist of three complete components: a sub floor system, a roof system, and a wall system. The floor system consists of pre-engineered steel floor joists, designed as per your architecturals. Also included are steel rim panels, blocking and steel floor sheathing. The wall system consists of welded, galvanized tubular steel frame panels. The panels come with bolts for panel-to-panel attachment, an EPS foam core in thicknesses of either 3.5” or 5.5”, headers, shear walls and sheathing (choice of Dens Glass, Hardie Board, etc.). These tubular steel panels make up the structural component of the system.

Tube Steel Frame

The tube steel frame is welded into panels and assembled at the job site with a minimum of labor. Installation times rival the SIP system. The sheathing on the exterior is an insulated nail-base panel. The insulated nail-base panel is one side Dens Glass Gold, Hardie Board or other approved sheathing material. The panels are attached to the frame with self-drilling screws.

The roof system consists of pre-engineered steel trusses (per architecturals), fascia and purlins, sheathing, hurricane ties and roof clips. Over and above these materials, you will also receive assembly drawings, engineer stamped structurals, and a toll free number to call for any technical support that you may require.

NON-WOOD PRODUCTS:

Floor System:

Floor System
  • Pre-engineered steel floor joists as per plan
  • rim panel (steel)
  • Hurricane Ties
  • blocking
  • Fascia and purlin lumber
  • steel floor sheathing

Wall System:

Wall System
  • Welded tubular steel frame panels
  • Bolted panel to panel attachment
  • EPS foam core (thicknesses of 3.5” or 5.5”)
  • Headers
  • Shear walls
  • Sheathing (Dens Glass, Hardie Board, etc.)

Roof System:

Roof System
  • Pre-engineered steel trusses as per plan
  • Fascia and purlins
  • Sheathing
  • Hurricane ties
  • Fascia and purlin lumber
  • Roof clips